Bolt Pretension in Ansys Workbench: SC3 End-Plate Connection with All-Hex Bolts (Pretension Section with Lock, Initial Shank Stress, .wbpz)

€89,00
Optional extras

Need a full custom project? See the options below.

€89,00
Optional extras

Need a full custom project? See the options below.

21 people watching this product now!

Material Includes

  • Ansys Workbench project (.wbpz) with two analyses
  • Ansys results summary PDF
  • README

Audience

  • Engineers and students working in Ansys Workbench on bolted steel connections
  • Researchers comparing bolt preloading techniques
  • Engineers who need a reference for frictional contact and moment-rotation checks

What You Will Learn?

  • Open a ready Ansys Workbench project of a preloaded extended end-plate beam-to-column connection with an all-hexahedral bolt mesh.
  • Compare a bolt pretension section (force preload and lock) with an initial shank stress analysis in the same project.
  • Check the moment-rotation response against Krolo et al. (2016) and the Shi et al. SC3 test.
  • See von Mises stress, end-plate gap opening and bolt bending in a frictional contact joint.
  • Reuse the setup for your own bolted steel connection.

About Course

Bolt Pretension in Ansys Workbench: SC3 End-Plate Connection

This product delivers a ready-to-open Ansys Workbench project for a preloaded extended end-plate beam-to-column connection. Two analyses sit in the same project: a force preload and lock analysis using a bolt pretension section, and an initial shank stress analysis. Both are loaded to large beam-end travel and compared with the published test and the reference paper. The model uses hexahedral (brick) elements throughout, including the bolts, so the bolt head, shank and nut are all-hex.

Ansys moment-rotation curves of the SC3 end-plate connection, bolt load and lock and initial shank stress, against the Shi test and Krolo FEA
Moment-rotation curves from Ansys for both preload approaches, with the Shi et al. SC3 test and the published FEA curve of Krolo et al.

Reference paper

Title: The Guidelines for Modelling the Preloading Bolts in the Structural Connection Using Finite Element Methods.
Authors: Krolo, P., Grandic, D., Bulic, M. (2016).
Journal: Journal of Computational Engineering, Volume 2016, Article ID 4724312. DOI: 10.1155/2016/4724312.

Paper abstract (paraphrased)

The paper presents two numerical techniques for preloading bolts in a finite element model, implemented by the authors in Abaqus/Standard, together with guidance on contact definition and on avoiding numerical problems such as singularity errors, negative eigenvalues from rigid body motion and excessive bolt elongation after pretension. An extended end-plate beam-to-column connection under monotonic loading is used to compare the two approaches; results are given as moment-rotation curves and validated against an experimental test, with a discussion of the advantages, disadvantages and speed of each technique. This product applies the same two preloading ideas in Ansys. (Paraphrased from Krolo et al., 2016; see the original article for the full abstract.)

What is included

  • Ansys Workbench project as one archived .wbpz, with two analyses: force preload and lock, and initial shank stress
  • Ansys results summary PDF with the validation comparisons
  • Short README

The project opens in your own Ansys Workbench installation.

Model features

  • SC3 extended end-plate connection: H-300×200 beam, H-300×250 column, 20 mm end plate
  • Four-bolt half model with symmetry
  • All-hexahedral (brick) mesh, including the bolts
  • Analysis 1: bolt pretension section with force preload, then lock
  • Analysis 2: initial stress in the bolt shank
  • Frictional contact with coefficient 0.44
  • Monotonic loading carried to 125 mm beam-end travel
Ansys geometry of the SC3 extended end-plate beam-to-column connection half model with four bolts
Ansys geometry of the half model: H-300×200 beam, H-300×250 column and the 20 mm end plate with four bolts.
Ansys all-hexahedral mesh of the SC3 end-plate connection with element edges
All-hexahedral mesh of the model, shown with element edges.
Ansys hexahedral mesh of the SC3 end plate, column flange and bolts with element edges
Mesh of the end plate, column flange and bolts with element edges.
Ansys hexahedral mesh of the SC3 end-plate joint without element edges
The same joint mesh without element edges.
Ansys close-up of the all-hexahedral brick-element mesh of the pretensioned bolts
Close-up of the hexahedral bolt mesh: head, shank and nut in brick elements.
Ansys loads, bolt pretension and boundary conditions of the SC3 end-plate connection half model
Loads, bolt pretension and boundary conditions of the half model.

Validation: paper vs FEA (Ansys)

ResultAnsysReference
Moment at 0.067 rad, force preload and lock (kN m)300.7Shi et al. test peak 308.3 (paper FEM 309.3)
Moment at 0.067 rad, initial stress (kN m)300.4Shi et al. test peak 308.3 (paper FEM 303.0)
Beam-end travel reached (mm)125–

The PDF summary overlays the Ansys moment-rotation curves on the test result and the published FEA curve (Figure 9 of Krolo et al.). All Ansys values come from the real solver run of the included model.

Ansys von Mises stress in the SC3 end-plate connection with hexahedral bolts at 0.067 rad joint rotation
Von Mises stress in the joint and bolts at 0.067 rad.
Ansys von Mises stress of the whole SC3 beam-to-column model at 0.067 rad joint rotation
Von Mises stress in the whole model at 0.067 rad joint rotation.
Ansys contour of horizontal displacement showing the end-plate gap in the tension zone at 0.067 rad
Gap opening between end plate and column flange in the tension zone at 0.067 rad.
Ansys contact pressure on the end plate showing prying action around the bolts at 0.067 rad
Contact pressure on the end plate showing prying around the bolts at 0.067 rad.
Ansys axial stress in the pretensioned hexahedral bolts at 0.067 rad showing bolt bending
Axial stress in the bolts at 0.067 rad, showing the bending of the bolts.
Unedited Ansys Mechanical von Mises stress contour of the SC3 end-plate joint with pretensioned hexahedral bolts
Unedited Ansys Mechanical von Mises contour of the joint, straight from the solver.

Who this is for

Engineers and students working in Ansys Workbench who need a clear reference for bolt pretension, frictional contact and moment-rotation checks on a steel connection.

Also available as a separate Abaqus product (see the Abaqus version of this model).

Frequently asked questions

Which two analyses are in the Workbench project? A bolt pretension analysis with a force preload and lock step, and an initial shank stress analysis. Both are in the single .wbpz.

What files do I receive? One archived Ansys Workbench project (.wbpz), an Ansys results summary PDF and a short README.

Where do I run it? In your own Ansys Workbench installation: restore the .wbpz archive and the project, including its geometry, is restored.

What was validated? The moment at 0.067 rad is 300.7 kN m (force preload and lock) and 300.4 kN m (initial stress), against a test peak of 308.3 kN m from Shi et al. Loading reaches 125 mm beam-end travel.

What connection is modelled? The SC3 extended end-plate joint: H-300×200 beam, H-300×250 column, 20 mm end plate, four-bolt half model, friction coefficient 0.44, meshed with hexahedral (brick) elements throughout, bolts included.

Independent engineering model prepared from the published study; check results against your own design requirements.

Need more than the files?

There are two ways we can help. Book a one hour online consultation if you want to talk a problem through with a CAE engineer, using the checkbox in the order box. Order a project if you need a full simulation built for you, delivered to an agreed scope, price and deadline under a written contract.

We work on FEA and CFD for engineers, researchers and companies. Order your project, or message us on WhatsApp for a quick reply.

Course Content

Product files

  • Ansys Workbench project (.wbpz) + results summary PDF + README (complete package)

Reviews

No Review Yet
No Review Yet
€89,00
Optional extras

Need a full custom project? See the options below.

21 people watching this product now!

Material Includes

  • Ansys Workbench project (.wbpz) with two analyses
  • Ansys results summary PDF
  • README

Audience

  • Engineers and students working in Ansys Workbench on bolted steel connections
  • Researchers comparing bolt preloading techniques
  • Engineers who need a reference for frictional contact and moment-rotation checks

Related  Products

See more

Want to receive push notifications for all major on-site activities?

✕