2D and Axisymmetric pull-out test analysis of a steel fiber
Steel Fiber Pull-Out Simulation Using Abaqus The pull-out behavior of a single steel fiber embedded in concrete is one of the fundamental mechanisms governing the mechanical performance of steel fiber–reinforced concrete (SFRC). The load transfer between the fiber and the surrounding concrete matrix controls crack bridging, post-cracking strength, toughness, and energy absorption capacity of the […]
Analysis of Masonry Wall under Seismic, Shear, and Compressive Loads
Masonry Wall Analysis Under Seismic, Shear, and Compressive Loading Using Abaqus Masonry walls are widely used as structural and non-structural elements in buildings due to their durability, thermal efficiency, and cost-effectiveness. However, their structural behavior is highly complex because masonry is a heterogeneous assemblage composed of discrete units (bricks) bonded by mortar joints. The nonlinear […]
Analysis of the new concrete masonry block under compression load in Abaqus
Concrete Masonry Block Analysis Under Axial Compression Using Abaqus Concrete masonry blocks are among the most widely used construction materials due to their cost-effectiveness, durability, and ease of production. Their structural performance, particularly under compressive loading, plays a critical role in determining the load-bearing capacity and overall stability of masonry structures. With the development of […]
Analysis of a composite GLARE panel under air blast load
Simulation Pull-Out Test Modeling of GFRP bars bonded with epoxy inside timber
Introduction to Simulation Pull-Out Test Modeling of GFRP Bars in Timber with Epoxy The Pull-Out Test is a widely used experimental method to assess the bond behavior between reinforcement materials and a substrate, such as glass fiber-reinforced polymer (GFRP) bars embedded in timber using epoxy adhesives. This method provides valuable insights into the load transfer […]
Analysis of adhesively bonded cross-laminated timber-concrete composite under close blast explosion test
The increasing demand for sustainable and resilient building materials has driven the development of hybrid structural systems that combine the advantages of different materials. One such system is the cross-laminated timber–concrete (CLT–concrete) composite, which leverages the high stiffness and compressive strength of concrete with the lightweight, renewable, and ductile characteristics of cross-laminated timber (CLT). These […]
Simulation composite pipe(CFRP+Concrete-Steel-Concete-Steel) undder
This study investigates the dynamic response of a multi-layered composite pipe structure, composed of CFRP, concrete, and steel layers, subjected to internal blast loading. A high-fidelity finite element model is developed using Abaqus Explicit, incorporating advanced material models, contact definitions, and blast loading conditions. The objective is to assess the blast resistance and failure mechanisms […]
